CHXTG - SUN-PROOF EXTERIOR LATEX 78 LINE, 78-300
- MSDS: CHXTG
- Manufacturer: PPG INDUSTRIES INC
- Product Name: SUN-PROOF EXTERIOR LATEX 78 LINE, 78-300
- National Stock Number: 8010-00N018493
Product Identification
Product ID:SUN-PROOF EXTERIOR LATEX 78 LINE, 78-300
MSDS Date:01/20/1995
FSC:8010
NIIN:00N018493
Status Code:A
MSDS Number: CHXTG
Responsible Party
ALLISON PARK, PA 15101
US
Emergency Phone: 304-843-1300
Info Phone: 800-441-9695
Cage: 47695
Contractor
Telephone: 1-800-245-2974 (CAL HYPO)
Cage: 47695
Ingredients
IRON OXIDES, OXIDES OF ZINC, OXIDES OF
RTECS: 9999999ZZ
POLYMER FRACTIONS. EXTREME HEAT INCLUDES, BUT IS NOT
RTECS: 9999999ZZ
INCRD RISK OF CANCER FROM EXPOS. POTENTIAL
RTECS: 9999999ZZ
IS VERY LIMITED. SINCE OVEREXPOSURES ARE NOT
RTECS: 9999999ZZ
IF INGEST, ANY TYPE OF OVEREXP/SYMPS
RTECS: 9999999ZZ
CONTACT A POISON CONTROL CENTER, EMERGENCY ROOM OR
RTECS: 9999999ZZ
DISPOSAL. ONLY THE SPILLED MATERIAL AND THE
RTECS: 9999999ZZ
THE LEL BELOW THE STATED LIMIT, AND TO REMOVE
RTECS: 9999999ZZ
NEOPRENE RUBB, NITRILE RUBB/LATEX. NO
RTECS: 9999999ZZ
ON PROT CLTHG FOR THIS PROD. RECS FOR SKIN PROT ARE
RTECS: 9999999ZZ
CONTACT/TOTAL IMMERSION, CONTACT A MFR OF
RTECS: 9999999ZZ
GLYCOLS, POLYETHYLENE, MONO(P-(1,1,3,3-TETRAMETHYL
CAS: 9002-93-1
RTECS: MD0907700
Fraction By Weight: 1-<5%
OSHA PEL N/K
ACGIH TLV: N/K
ETHYLENE GLYCOL (SARA 313) (CERCLA)
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 1-<5%
OSHA PEL N/K
ACGIH TLV: C 50 PPM, VAPOR
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
IRON OXIDE; (RED IRON OXIDE)
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 5-<10%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG(FE)/M3 FUME, B2
ZINC OXIDE (SARA 313) (CERCLA)
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 1-<5%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 30-<40%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
4-ISOTHIAZOLIN-3-ONE, 2-OCTYL-; (OCTYLISOTHIAZOLONE)
CAS: 26530-20-1
RTECS: NX8156900
Fraction By Weight: 0.1-<1%
OSHA PEL N/K
ACGIH TLV: N/K
2-PROPANOL,1-(2-BUTOXY-1-METHYLETHOXY); (DIPROPYLENE
CAS: 29911-28-2
RTECS: UA8200000
Fraction By Weight: 1-<5%
OSHA PEL N/K
ACGIH TLV: N/K
SILICA GEL; (SILICA)
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 1-<5%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGEST: HARMFUL IF SWALLOWED.
EYES: CAUSES SEV IRRIT. SKIN: MAY CAUSE SLIGHT IRRIT. PRLNG/RPTD
CONT MAY CAUSE ALLERGIC RXN. INHAL: VAP &/OR SPRAY MIST MAY BE
HARMFUL IF INHALED. VAP IRRITATES E YES, NOSE, & THROAT. CHRONIC:
AVOID LONG-TERM & RPTD CONT. INGEST OF PRODS CONTAINING ETHYLENE
GLYCOL (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: MAY DMG KIDNEYS & LIVER & HAS BEEN
SHOWN TO CAUSE BIRTH DEFECTS IN LAB ANIMALS. NO EVIDENCE OF THESE
EFTS HAS BEEN FOUND IN HUMANS. ANIMALS INHALING MASSIVE QTYS OF
TITANIUM DIOXIDE DUST IN A LONG-TERM STUDY DEVELOPED LUNG TUMORS.
STUDIES W/HUMANS INVOLVED IN MANUFACTURE OF THIS PIGMENT INDICATE
NO (ING 11)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:INGEST: DO NOT INDUCE VOMITING. GENTLY WIPE OUT INSIDE OF
MOUTH TO REMOVE ANY RESIDUAL MATERIAL. EYES: REMOVE CONTACT LENSES
& FLUSH EYES IMMED W/GENTLE STREAM OF LUKE WARM WATER FOR AT LEAST
15 MINS. SKIN: FLUSH IMMED W/PLENTY OF WATER FOR AT LEAST 15 MINS
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTIFICIAL RESPIRATION & OTHER SUPPORT MEASURES AS REQUIRED.
(ING 13)
Fire Fighting
Extinguishing Media:USE EXTINGUISHERS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY MAY BE USED TO COOL
CLSD CONTRS THAT ARE EXPOSED TO (SUP DAT)
Unusual Fire/Explosion Hazard:WHEN PROD IS USED, OVERSPRAY & OTHER
COMBUST MATLS SUCH AS PAINT BOOTH FILTERS, RAGS, MASKING MATLS,
ETC, CONTAM BY COATING MATL ARE SUBJECT TO SPONT (SUP DAT)
Accidental Release
Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH APPRVD RESP, SKIN, & EYE PROT SHOULD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAND,
VERMICULITE/OTHER NON-COMBUST M ATL & PLACE IN CLEAN, EMPTY CONTRS
FOR (ING 15)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
SYSTEM, READ THE MSDS FOR THE OTHER COMPONENTS BEFORE BLENDING SO
THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PARTS.
Exposure Controls
Respiratory Protection:IF VENT IS INAD, USE NIOSH APPRVD (TC-23C) AIR
PURIFYING/AIR SUPP (TC-19C) RESP. READ RESP MFR'S INSTRUCTIONS &
LITERATURE CAREFULLY TO DETERMINE TYPE OF AIRBORNE CONTAMS AGAINST
WHICH RESP IS EFFECTI VE & HOW IT IS TO BE PROPERLY FITTED.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMITS, (ING 16)
Protective Gloves:NEOPRENE RUBBER, NITRILE RUBBER/LATEX.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR PROT CLTHG TO PVNT SKIN CONT. APRON SHOULD BE MADE OF (ING 17)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: EXTREME HEAT. IF WATER IS USED, FOG NOZZ ARE PREF.
EXPLO HAZ: COMBUST. WETTING CONTAM MATLS & NOT PACKING THEM TIGHTLY
TOGETHER IN REFUSE CONTRS WILL MIN POTENTIAL FOR THIS TO OCCUR.
CLSD CONTRS MAY EXPLODE/BURST (DUE TO BUILD-UP OF PRESS) WHEN
EXPOSED TO EXTREME HEAT.
Chemical Properties
Boiling Pt:B.P. Text:>205F,>96C
Vapor Pres:17.0
Vapor Density:HVR/AIR
Spec Gravity:1.297
Evaporation Rate & Reference:34 (BUTYL ACETATE=100)
Solubility in Water:<74%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACT OF CHEM FAMILY & ANY
SOLVS LISTED IN INGS SECTION.
Percent Volatiles by Volume:65-79
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE THE FOLLOWING HAZ DECOMP
PRODUCTS WHEN EXPOSED TO EXTREME HEAT: CARBON MONOXIDE, CARBON
DIOXIDE, (ING 9)
Disposal
Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEME NT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.